Special of the Week
|
Sale price good through Tuesday, May 21, 2024
Limit: One per customer |
Knurler, Large Capacity
|
|
 |
- 0 to 2" (50 mm) diameter capacity
- Fits standard 4-way and quick change tool posts
- Includes three sets of knurls
|
This scissors knurling tool is made to our design, specifically for the mini lathe.
This knurler fits in the standard tool post of the mini lathe without any modification. This knurling tool also works with any of the quick change tool posts we sell.
The mounting bar is 3/8" (9.5 mm) tall so it replaces a 3/8" tool bit.
It comes with fine (33 lines per inch, 0.8 mm pitch), medium (21 lines per inch, 1.2 mm pitch), and coarse (14 lines per inch, 1.8 mm pitch) diamond knurls.More information about this product
Want to get an email notification every time we have a weekly special? Then
click here to join our mailing list.
Check These Other Featured Products
|
- Accuracy: ± 20 seconds
- Thickness: 1/4"
- 1 pc: 4" x 3 12/32" x 2" with 30°, 60° & 90° angles
- 1 pc: 3" x 3" x 4 3/8" with 45°, 45° & 90° angles
- Four 11/32" holes for easy mounting
|
|
- Full featured miniature lathe at an incredible price
- Includes 3" 3-jaw chuck, 2 sets of jaws, and chuck key
- Variable speed with two speed ranges for low speed torque
- Threading Dial
- 2MT dead center, change gear set, 1/2" drill chuck
|
|
- Extended bed (16" between centers) provides more working room
- Most powerful and most low-speed torque in its class. No gears in spindle drive
- 4" 3-jaw lathe chuck
- Cam lock tailstock
- CHUCK GUARD HAS NOW BEEN REMOVED
|
|
- All the Features of the HiTorque 5100 (brushless motor, gearless spindle drive, extended bed, etc.)
- LED display with illuminated controls and integrated spindle speed readout
- 2-Axis Bluetooth DRO (w/tablet) on ways and cross feed, DRO readouts on tailstock and compound
- Aluminum hand wheels and chrome levers
- 0XA wedge-type quick change tool post and five tool holders
|
|
- Floor standing band saw, 4x6, Model 15-400 - Rikon
- Horizontal position for precise cutting and automatic shutoff
- Vertical position for freehand cutting
- 3 blade speeds: 80, 120, and 180 feet per minute
- 4" x 6" rectangular capacity or 4-1/2" round stock capacity
|
|
- Quick change tool post set for lathes with up to 8" swing
- 0XA, or series 000 size (60% of AXA size)
- Includes five steel tool holders
- Horizontal Cut-off tool holder
- Fits all 7x10 to 7x16 mini lathes
|
|
Disc Cutter Set, 1/4-5/8", 7 Piece
Center Gage, 60 Degree
