Turning & Boring Tools, 3/8" Indexable, 3 Piece Set, A R Warner

Right and left hand turning tools with 0.375" shank 3.5" long
Boring bar with 0.375" shank 5.0" overall length
Includes three T-15 HSS (CCMW21.51) inserts for turning
Includes two T-15 HSS (CEMW21.51) inserts for boring
Includes two MS-1152S screws, three MS-1153 screws and one T-7 wrench

Part Number: 3694
Weight: 0.80 lb

Price: $214.95

Share this page:
http://lmscnc.com/3694

This Arthur R. Warner Co. kit includes a 3/8" right-hand turning tool, a 3/8" left-hand turning tool, and a 3/8" boring bar. The right hand turning bar has a 0.375" shank, and is 3.50" in overall length.The left hand turning bar has a 0.375" shank, and is 3.50" in overall length. The left hand turning bar has a second insert pocket in opposite end that provides a 50° side cutting edge angle. This provides a way to use the two insert points that are not used in the other tool holders. The boring bar has a 0.375" shank, and is 5.0" in overall length. It has 0.188" flat along length for location, and requires a 0.365" minimum bore. The Arthur R. Warner Co. is a family-owned American manufacturer of high speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high speed steel. Their quality is excellent and LittleMachineShop.com is proud to carry their products.

Chris' Tips

Chris' Tips

ABOUT A.R. WARNER

The Arthur R. Warner Co. is a family-owned American manufacturer of high-speed steel products with specialization in cutting, shaping, pre-grinding, heat treating, and finish grinding of premium grades of flat high-speed steel (and tool steel).

Our Indexable Turning Tool Set was first introduced in July of 1998. Since the introduction, we have expanded our sizes of Turning Tool Sets, introduced 2 sizes of Indexable Boring Bar Kits, a Profiling Kit and a Threading Kit with the appreciated input from numerous Home Shop Machinists.Our latest kits, designed for grooving, have been very well received in both hobbiest and manufacturing markets.

Our kits contain T-15 HSS throw-away inserts. Most machinists are familiar with "Steel" toolbits and Carbide inserts, and now they can achieve the convenience of indexability while using a cutting material which is typically better suited for their smaller lathes and milling machines. Overall, we consider T-15 HSS to be the best grade of readily available HSS for wear resistance, toughness, and hot hardness.

Use T-15 HSS for:

Interrupted Cuts
Underpowered Spindles
Gummy material like stainless, aluminum, and brass
Less than rigid setups

Make sure you get the correct inserts and retaining screws for your indexable turning tools.

Our chart of indexable inserts shows which inserts and which screw to use with each of our indexable tools.

Here's a video that talks about high speed steel tooling.

Compatibility

Compatibility

This product works with these LittleMachineShop.com products:

AUGUST MINI LATHE SALE!!!

Turning & Boring Tools, 3/8" Indexable, 3 Piece Set, A R Warner