3-axis universal Bluetooth digital position readout (DRO)
finest hacksaw blade (or band saw blade) you have (preferably 32 teeth per inch), carefully saw down through the channel. Use a fine file to debur the end of the aluminum channel. Install the two end caps. Note that there is a slot in the end cap that should align with the stainless steel strip.
Selecting the Right Band Saw Blade - LittleMachineShop.com
The proper break-in of a bi-metal blade assures longer blade life, faster cuts for a longer period of time and consistent performance. Run the normal surface feet per minute (SFM). Adjust the feed pressure to about one-half the normal cutting rate for the first few cuts or for 50-100 square inches (323-645 sq. cm).
Bluetooth DRO Installation on a Mini Lathe
magnetic strip in the channel. Using the finest hacksaw blade (or band saw blade) you have (preferably 32 teeth per inch), carefully saw down through the channel. 5. Use a fine file to debur the end of the aluminum channel. 6. Install the two end caps. Note that there is a slot in the end cap that should align with the stainless steel strip.
Shooting Star DRO Installation Instructions
Use a band saw or hacksaw to cut away most of the waste material. Locate and drill the two 0.257” mounting holes. Use ¼” bolts through these holes to clamp the material on top of a 1-2-3 block so you can mill the part to size. Move the step clamps as you work around the part. The two bolts will hold the bracket in position.
2 Axis CNC Retrofit Kit For SIEG X2 Mini Mill.
This is easily achieved using a hacksaw, cut-off wheel, or lathe. Procedure 5: Clean & Lubricate Bearings Use a good quality bearing grease for long bearing life. Lubriplate 630-AA is a good choice, but any quality bearing grease will work fine. 1. Thoroughly clean the bearings with mineral spirits (paint thinner).