End Mill Holders

End mill holders - LittleMachineShop.com

LittleMachineShop.com has R8, 3 Morse taper and 2 Morse taper end mill holders in all sizes. They are available individually or in sets. We carry the Tormach quick change tooling system for mills. And we have end mill holders for Taig and Sherline mills.

1978 End Mill Holder Set, 2MT 4 Piece

Set of four 2 Morse taper end mill holders
2 Morse Taper Shanks
Drawbar thread is 3/8-16
Compatible with Mills with 3 Morse Taper Spindle
For end mills with shanks 3/16", 3/8", 1/2", and 5/8"

The 4-Piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, and 5/8 inches. This end mill holder set works with the Harbor Freight micro mill and other mills with a 2 Morse taper spindle. The drawbar thread is 3/8-16 NC.

1636 End Mill Holder Set, 3MT, 5-Piece

Set of 5 3 Morse taper end mill holders
3 Morse Taper Shanks
Drawbar thread is 3/8-16
Compatible with Mills with 3 Morse Taper Spindle
For end mills with shanks 3/16", 3/8", 1/2", 5/8", and 3/4"

The 5-Piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, 5/8, and 3/4 inches. This end mill holder works with the mini mill with a 3 Morse taper spindle and other mills with a 3 Morse taper spindle. The drawbar thread is 3/8-16 NC.

1258 End Mill Holder Set, R8, 5 Piece

Set of five R8 end mill holders from 3/16" to 3/4"
R8 Shanks
Drawbar End Thread is 7/16"-20
Compatible with Mills with R8 Spindle
For end mills with shanks 3/16", 3/8", 1/2", 5/8", and 3/4"

The 5-piece end mill holder set includes adapters for end mills with shank diameters of 3/16, 3/8, 1/2, 5/8, and 3/4 inches. The end mill holders have an R8 shank and use the drawbar that comes with the mini mill. This end mill holder works with the mini mill with R8 spindle and other mills that have an R8 spindle. Like every R8 tool, the R8 drawbar thread is 7/16"-20.

1706 End Mill Holder, 2MT, 1/2"

1/2" Diameter Hole
2 Morse Taper Shank
Uses a 3/8"-16 NC Drawbar
Compatible with Mills with 2 Morse Taper Spindle

Adapter for 1/2 shank end mills. The end mill holder has a 2 Morse taper shank and uses a 3/8-16 NC drawbar. This end mill holder works with mills with a 2 Morse taper spindle. The drawbar thread is 3/8-16 NC.

1976 End Mill Holder, 2MT, 3/16"

3/16" Diameter Hole
2 Morse Taper Shank
Uses a 3/8"-16 NC Drawbar
Compatible with Mills with 2 Morse Taper Spindle

Adapter for 3/16 shank end mills. The end mill holder has a 2 Morse taper shank and uses a 3/8-16 NC drawbar. This end mill holder works with mills with a 2 Morse taper spindle. The drawbar thread is 3/8-16 NC.

1705 End Mill Holder, 2MT, 3/8"

3/8" Diameter Hole
2 Morse Taper Shank
Uses a 3/8"-16 NC Drawbar
Compatible with Mills with 2 Morse Taper Spindle

Adapter for 3/8 shank end mills. The end mill holder has a 2 Morse taper shank and uses a 3/8-16 NC drawbar. This end mill holder works with mills with a 2 Morse taper spindle. The drawbar thread is 3/8-16 NC.

1977 End Mill Holder, 2MT, 5/8"

5/8" Hole Diameter
2 Morse Taper Shank
Uses a 3/8"-16 NC Drawbar
Compatible with Mills with 2 Morse Taper Spindle

Adapter for 5/8 shank end mills. The end mill holder has a 2 Morse taper shank and uses a 3/8-16 NC drawbar. This end mill holder works with mills with a 2 Morse taper spindle. The drawbar thread is 3/8-16 NC.

1633 End Mill Holder, 3MT, 1/2"

1/2" Hole Diameter
3 Morse Taper Shank
Uses a 3/8"-16 NC Drawbar
Compatible with Mills with 3 Morse Taper Spindle

Adapter for 1/2" shank end mills. The end mill holder has a 3 Morse taper shank and uses a 3/8-16 NC drawbar. This end mill holder works with the mini mill with a 3 Morse taper spindle and other mills with a 3 Morse taper spindle. The drawbar thread is 3/8-16 NC.

1631 End Mill Holder, 3MT, 3/16"

3/16" Hole Diameter
3 Morse Taper Shank
Uses a 3/8"-16 NC Drawbar
Compatible with Mills with 3 Morse Taper Spindle

Adapter for 3/16" shank end mills. The end mill holder has a 3 Morse taper shank and uses a 3/8-16 NC drawbar. This end mill holder works with the mini mill with a 3 Morse taper spindle and other mills with a 3 Morse taper spindle. The drawbar thread is 3/8-16 NC.

1635 End Mill Holder, 3MT, 3/4"

3/4" Hole Diameter
3 Morse Taper Shank
Uses a 3/8"-16 NC Drawbar
Compatible with Mills with 3 Morse Taper Spindle

Adapter for 3/4" shank end mills. The end mill holder has a 3 Morse taper shank and uses a 3/8-16 NC drawbar. This end mill holder works with the mini mill with a 3 Morse taper spindle and other mills with a 3 Morse taper spindle. The drawbar thread is 3/8-16 NC.

1632 End Mill Holder, 3MT, 3/8"

3/8" Hole Diameter
3 Morse Taper Shank
Uses a 3/8"-16 NC Drawbar
Compatible with Mills with 3 Morse Taper Spindle

Adapter for 3/8" shank end mills. The end mill holder has a 3 Morse taper shank and uses a 3/8-16 NC drawbar. This end mill holder works with the mini mill with a 3 Morse taper spindle and other mills with a 3 Morse taper spindle. The drawbar thread is 3/8-16 NC.

1634 End Mill Holder, 3MT, 5/8"

5/8" Hole Diameter
3 Morse Taper Shank
Uses a 3/8"-16 NC Drawbar
Compatible with Mills with 3 Morse Taper Spindle

Adapter for 5/8" shank end mills. The end mill holder has a 3 Morse taper shank and uses a 3/8-16 NC drawbar. This end mill holder works with the mini mill with a 3 Morse taper spindle and other mills with a 3 Morse taper spindle. The drawbar thread is 3/8-16 NC.

1255 End Mill Holder, R8, 1/2"

1/2" Hole Diameter
R8 Shank
Drawbar End Thread is 7/16"-20
Compatible with Mills with R8 Spindle

Adapter for 1/2" shank end mills. This end mill holder has an R8 shank and uses the drawbar that came with your mini mill. This end mill holder works with the mini mill with R8 spindle and other mills that have an R8 spindle.

1253 End Mill Holder, R8, 3/16"

3/16" Hole Diameter
R8 Shank
Drawbar End Thread is 7/16"-20
Compatible with Mills with R8 Spindle

Adapter for 3/16" shank end mills. This end mill holder has an R8 shank and uses the drawbar that came with your mini mill. This end mill holder works with the mini mill with R8 spindle and other mills that have an R8 spindle.

1257 End Mill Holder, R8, 3/4"

3/4" Hole Diameter
R8 Shank
Drawbar End Thread is 7/16"-20
Compatible with Mills with R8 Spindle

Adapter for 3/4" shank end mills. This end mill holder has an R8 shank and uses the drawbar that came with your mini mill. This end mill holder works with the mini mill with R8 spindle and other mills that have an R8 spindle.

1254 End Mill Holder, R8, 3/8"

3/8" Hole Diameter
R8 Shank
Drawbar End Thread is 7/16"-20
Compatible with Mills with R8 Spindle

Adapter for 3/8" shank end mills. This end mill holder has an R8 shank and uses the drawbar that came with your mini mill. This end mill holder works with the mini mill with R8 spindle and other mills that have an R8 spindle.

1256 End Mill Holder, R8, 5/8"

5/8" Hole Diameter
R8 Shank
Drawbar End Thread is 7/16"-20
Compatible with Mills with R8 Spindle

Adapter for 5/8" shank end mills. This end mill holder has an R8 shank and uses the drawbar that came with your mini mill. This end mill holder works with the mini mill with R8 spindle and other mills that have an R8 spindle.

2438 End Mill Holder, Tormach TTS, 1/2"

Quick change adapter for 1/2" shank end mills
Minimal clearance height for tool change
Repeatable tool positioning
Hardened and precision ground

Quick change Tormach 1/2" suitable for general milling operations and are intended to be used with end mills that have a Weldon shank (flat surface on shank). They can also be used with certain Silver & Deming style drill bits. The tool holder has a set screw on one side and a balancing dimple on the other side. The balancing dimple reduces vibrations at speeds above 8000 RPM. See Chris' Tips regarding centering of end mills when using a set screw holder.

3026 End Mill Holder, Tormach TTS, 1/4"

Quick change adapter for 1/4" shank end mills
Minimal clearance height for tool change
Repeatable tool positioning
Hardened and precision ground

Quick change Tormach 1/4" set screw tool holder for end mills and other milling tools. Tormach screw holders are suitable for general milling operations and are intended to be used with end mills that have a Weldon shank (flat surface on shank). They can also be used with certain Silver & Deming style drill bits. The tool holder has a set screw on one side and a balancing dimple on the other side. The balancing dimple reduces vibrations at speeds above 8000 RPM. See Chris' Tips regarding centering of end mills when using a set screw holder.

4125 End Mill Holder, Tormach TTS, 10 mm

Quick change adapter for 10 mm shank end mills
Minimal clearance height for tool change
Repeatable tool positioning
Hardened and precision ground

Quick change Tormach 10 mm set screw tool holder for end mills and other milling tools. Tormach screw holders are suitable for general milling operations and are intended to be used with end mills that have a Weldon shank (flat surface on shank). They can also be used with certain Silver & Deming style drill bits. The tool holder has a set screw on one side and a balancing dimple on the other side. The balancing dimple reduces vibrations at speeds above 8000 RPM. See Chris' Tips regarding centering of end mills when using a set screw holder.

4126 End Mill Holder, Tormach TTS, 12 mm

Quick change adapter for 12 mm shank end mills
Minimal clearance height for tool change
Repeatable tool positioning
Hardened and precision ground

Quick change Tormach 12 mm set screw tool holder for end mills and other milling tools. Tormach screw holders are suitable for general milling operations and are intended to be used with end mills that have a Weldon shank (flat surface on shank). They can also be used with certain Silver & Deming style drill bits. The tool holder has a set screw on one side and a balancing dimple on the other side. The balancing dimple reduces vibrations at speeds above 8000 RPM. See Chris' Tips regarding centering of end mills when using a set screw holder.

2434 End Mill Holder, Tormach TTS, 3/8"

Quick change adapter for 3/8" shank end mills
Minimal clearance height for tool change
Repeatable tool positioning
Hardened and precision ground

Quick change Tormach 3/8" suitable for general milling operations and are intended to be used with end mills that have a Weldon shank (flat surface on shank). They can also be used with certain Silver & Deming style drill bits. The tool holder has a set screw on one side and a balancing dimple on the other side. The balancing dimple reduces vibrations at speeds above 8000 RPM. See Chris' Tips regarding centering of end mills when using a set screw holder.

3025 End Mill Holder, Tormach TTS, 5/16"

Quick change adapter for 5/16" shank end mills
Minimal clearance height for tool change
Repeatable tool positioning
Hardened and precision ground

Quick change Tormach 5/16" suitable for general milling operations and are intended to be used with end mills that have a Weldon shank (flat surface on shank). They can also be used with certain Silver & Deming style drill bits. The tool holder has a set screw on one side and a balancing dimple on the other side. The balancing dimple reduces vibrations at speeds above 8000 RPM. See Chris' Tips regarding centering of end mills when using a set screw holder.

4124 End Mill Holder, Tormach TTS, 6 mm

Quick change adapter for 6 mm shank end mills
Minimal clearance height for tool change
Repeatable tool positioning
Hardened and precision ground

Quick change Tormach 6 mm set screw tool holder for end mills and other milling tools. Tormach screw holders are suitable for general milling operations and are intended to be used with end mills that have a Weldon shank (flat surface on shank). They can also be used with certain Silver & Deming style drill bits. The tool holder has a set screw on one side and a balancing dimple on the other side. The balancing dimple reduces vibrations at speeds above 8000 RPM. See Chris' Tips regarding centering of end mills when using a set screw holder.