Menu

Quick Change Tool Post Set, 0XA, Mini Lathe, 4-Degree Cut-Off 

Quick Change Tool Post Set, 0XA, Mini Lathe, 4-Degree Cut-Off
  • Quick change tool post set for lathes with up to 9" swing
  • 60% of AXA, or series 100 size wedge type QCTP
  • This lathe quick change pool post set includes a 4-Degree Cut-off tool holder
  • Includes five tool holders
  • All steel construction
Part Number: 3048
Weight: 4.45 lb

Price: $158.95

In stock
Quantity:
 
 
PayPal Credit
This is a true wedge type quick change tool post set that is an exact 6/10 scale copy of the AXA, or series 100 wedge type quick change tool post.

This quick change tool post set is designed for lathes with up to 9" swing. It requires 3/4" from the top of the compound rest to the center of the lathe.

It will hold turning tools with shanks from 1/4" to 1/2". The boring bar holder will hold 3/8" and 1/2" boring bars. It will hold 1/2" tall cut-off blades.

All working parts are hardened and ground. It is completely sealed for maintenance-free operation.

This set includes the tool post and the following tool holders:

2 - #1 Turning & Facing

1 - #2 Boring, Turning & Facing

1 - #4 Heavy Duty Boring will hold both 3/8 and 1/2 boring bars

1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - 4-degree)

This tool post mounts with an M10 stud that is included. It also includes a piece of steel from which you can make a T-slot nut to fit your lathe.

Chris Chris' Tips
This QCTP is not a good fit for the mini lathe. It requires about 3/4" from the top of the compound to the centerline of the lathe. Get the 3112 QCTP instead.

This QCTP is great for most lathes up to 9" swing.

The 0XA quick change tool post and the associated tool holders were developed by Tormach and LittleMachineShop.com in cooperation.

See the comparison chart of the quick change tool post sets we carry.

The two 0XA tool posts (3112 and 3048) are the same except for the cut-off tool holder.

The 3112 has a cut-off tool holder that mounts the blade horizontally. Thus it can be used on lathes that have only 5/8” from the top of the compound to the centerline of the lathe, like the 7x mini lathes.

The 3048 has a cut-off tool holder that mounts the blade at a 4 degree angle. It needs ¾” from the top of the compound to the centerline because of the angled cut off blade.

Here are instructions for mounting the 0XA QCTP on various lathes.

Here's a video that shows how to mount this QCTP on a Grizzly G0768 8x20 lathe.