Menu

HiTorque 7x16 Mini Lathe 

HiTorque 7x16 Mini Lathe
  • Extended bed (16" between centers) provides more working room
  • Most powerful lathe with most low-speed torque in its class
  • 4" 3-jaw lathe chuck
  • No gears in spindle drive
  • Cam lock tailstock
Part Number: 5100
Weight: 127 lb

Price: $1,349.00

In stock
Quantity:
 
The LittleMachineShop.com HiTorque 7x16 Mini Lathe is the best in its class. It has the most power, most torque, and a longer center distance than other lathes in its class.

The 500 Watt brushless spindle drive motor provides tremendous low-end torque. And you can vary the speed from 50 rpm to 2500 rpm continuously in both directions. There are no gears to shift.

The cross feed and compound rest dials are graduated in 0.001" and 0.025 mm. A 4" 3-jaw lathe chuck is included, and the lathe is equipped with a 4-way indexing tool post set for 5/16" (8 mm) tools.

Real top and bottom half-nuts and a reversible 16 TPI lead screw provide extended threading capability. You can create every American Standard Unified class 2A inch screw thread from 4 to 80 threads per inch, and you can create every American Standard Metric class 6h thread from 0.3 to 8 mm pitch with the extra 21 tooth change gear that is included. Cutting inch threads is made even easier with the factory-installed threading dial.

This HiTorque 7x16 Mini Lathe for sale includes a chip tray, a backsplash guard, and spreaders to give the feet a broader stance.

This machine is shipped completely assembled and adjusted. Machined surfaces are coated with a viscous oil to prevent rust. It wipes off easily with a rag--no solvents necessary.

The LittleMachineShop.com model 5100 HiTorque Mini Lathe is a version of the SIEG SC2.

*NOTE* We ship machines only to the US and Canada.

Chris Chris' Tips
View a comparison of the specifications for our lathes.

See what the difference is between the SIEG drive system and the HiTorque drive system.

With this lathe, you can create every American Standard Unified class 2A inch screw thread from 4 to 100 threads per inch, and you can create every American Standard Metric class 6h thread from 0.25 to 8 mm pitch with the extra 21 tooth change gear that is included.

But you can actually make more thread pitches than that. And, there are more change gear combinations than those shown in the users guide. To see what you can really do, see the Change Gear Calculator.

Why our mini lathes have plastic change gears

First, a couple of notes:

  • Our HiTorque machines do not have the plastic gears that break. When you read about mini lathes and mini mills breaking plastic gears, the vast majority of cases involve the two-speed gears inside the head. HiTorque machines, with the brushless DC drive, have a belt directly from the motor to the spindle. No gears at all in the spindle drive.
  • Our larger HiTorque bench lathes have no plastic gear at all. Every gear is metal.
LittleMachineShop.com HiTorque mini lathes do have ABS plastic change gears. Here are the reasons:

  • Plastic gears are quieter than metal gears. Metal change gears raise the sound level to an objectional level.
  • Plastic gears are appropriate to this application. They work fine and when you crash your lathe, they provide an inexpensive, easy to replace “mechanical fuse”.
  • Plastic gears are more economical. We choose not to charge extra for a basically worthless feature.
If you prefer metal change gears, we sell a Metal Change Gear Set.

Here are data sheets for the machines that we sell.

Here are the users guides for the machines we sell.

  • Mini Lathe Users Guide written by Chris Wood
  • 500 Watt output spindle motor
  • NSK brand Japanese-quality spindle bearings
  • No gears in spindle drive
  • E-stop safety power switch
  • Zero-settable hand wheels graduated in 0.001" on cross slide and compound rest
  • Extended threading capability - inch and metric threads
  • Rear apron shield to keep swarf out of the mechanism
  • Cam lock tailstock
  • Four-way tool post
  • Reversible lead screw for right and left hand threads
  • 4" 3-jaw chuck
  • Threading dial
Specifications
Swing Over Bed 7.1" (180 mm)
Swing Over Saddle 4.3" (110 mm)
Distance Between Centers 16" (410 mm)
Cross Slide Travel 2.6" (65 mm)
Spindle Through Hole 0.8" (20 mm)
Spindle Taper #3 Morse taper
Tailstock Taper #2 Morse taper
Range of Threads 4-80 TPI; 0.3-8.0 mm
Spindle Motor Output 0.67 hp (500 Watts)
Spindle Speed 50 - 2500 RPM
Power Requirements 120 V 60 Hz 8 Amps
Machine Weight 90 lbs (41 kg)
Crated Weight 112 lbs (51 kg)
Overall Dimensions (W x D x H) 31" x 10" x 12" (790 mm x 260 mm x 300 mm)
Crate Dimensions (W x D x H) 35" x 16" x 15" (900 mm x 410 mm x 380 mm)
"5100 HiTorque 7x16 Mini Lathe 5100 HiTorque 7x16 Mini Lathe
"5100 HiTorque 7x16 Mini Lathe Control Box and 3-Jaw Lathe Chuck
"5100 HiTorque 7x16 Mini Lathe Compound Rest, Dials and Tool Post
"5100 HiTorque 7x16 Mini Lathe 2MT Cam Lock Tailstock
"5100 HiTorque 7x16 Mini Lathe Specifications Label

The HiTorque Mini Lathe comes with the following:

  • Mini Lathe Users Guide written by Chris Wood
  • 4" (100 mm) 3-jaw self centering lathe chuck with two sets of jaws and a chuck wrench
  • A Morse taper #2 dead center for the tailstock
  • An 11-gear change gear set that includes a 21 tooth gear for accurate metric threading
  • Two open end wrenches
  • Four hex (Allen) wrenches
  • A plastic oil can

March 1, 2022 - Recent and unprecedented price increases in truck freight and gas prices, especially to residential addresses, has required us to increase the cost of our truck freight. We hope the future will see a return to normal and historical costs, but until then freight delivery costs have increased. 

These machines ship by truck because they are simply too heavy and bulky for UPS Parcel Service. We normally ship truck orders a day or two after we receive the order. We add the following shipping cost to your order total:

 

Destination*Local
Continental
US

Freight Terminal (pick-up)

  • Within 50 miles / 1 hour of travel
  • Note: Not all terminals allow pickup
$150 $175

Commercial Address & Limited Access Sites

  • Set hours / No delivery appointment
  • Includes limited access (e.g. Schools, Military, Gov. Bldgs)
$99 $175

**Liftgate: Add liftgate if forklift or loading dock is not available onsite.

  + $75

Residential Address

  • Includes delivery appointment and liftgage
  • for ALL Residential businesses
$99 $270

 

*Local refers to the parts of Southern California served by Hollywood Delivery Service.

**Liftgate service is included in local delivery and residential delivery. A loading dock or forklift is assumed in commercial deliveries. If these are not available, please add this extra service.

 

Additional Notes

  • Contact and delivery. Ensure you choose the correct type of delivery, have a dedicated contact person/number, and are ready on day of delivery. Freight companies charge an additional fee if delivery exceeds 30 minutes.
     
  • Only one shipping charge for entire pallet (up to 700 pounds total). The shipping charges shown above cover the cost of shipping the machine and anything else that you purchase with it, including a second machine, stand, tooling, and accessories.
  • A "commercial address" has a sign with company name, a public entrance and posted hours of operation. If you are running a business at your residence without a public entrance and posted company name and hours of operation it is considered a residence and a not commercial address.
     
  • A "limited access" designation is required for "Secured Locations" (schools, colleges, universities, university hospitals, military bases, government facilities, etc). Please provide accurate details on delivery in special instructions.
     
  • "Terminal Pickup" allows for pickup at local terminal. If there is not a terminal within 50 miles (or 1 hour), we will confirm with you that you still want Terminal Pickup. Terminals tend to be near highways (usually miltiple intersecting) and industrial centers. Only certain terminals allow pick-up.
     
  • "Residential delivery" does not include moving machine into home/garage/workshop or any setup. Delivery is to start of driveway on the street that the delivery truck can access. (See inside delivery below.)

 

For delivery to Alaska, Hawaii, or Puerto Rico

We will check with several trucking companies to get the best price and then call for your approval before we ship.

 

Canadian Shipments

Truck Freight shipping to Canada involves 3 distinct charges in addition to the product costs. (All amounts are in US Dollars, see the current mid-market exchange rate.)

  1. Canadian Provincial Taxes (GST, PST, HST) depending on which province the shipment is going to. This will be 5% - 15% added to total sales amount depending on province (Canadian Sales Tax).
     
  2. Hemisphere Customs Brokerage which handles all customs clearance requirements. This is a flat fee of $108 on any shipment.
     
  3. Truck Freight from Southern California to destination in Canada. This is generally $300-$500 for residential liftgate delivery and appointment for single machine + tooling orders. Delivery to a terminal for pick-up or a commercial location with loading capabilities can reduce this cost substantially.

 

Quotes

To get a quotation that includes the shipping costs, add the products you want to the shopping cart and continue the checkout process until you reach the Payment page. On the Payment page, select the Quotation option. We will add the shipping costs and return a complete quotation to you within one business day.

 

Inside Delivery

Some carriers offer Inside Delivery which gets the machine inside one doorway or into your garage. If you select this we will confirm availability before shipping:

Inside DeliveryLocalContinental US

Gets the machine inside 1 threshold
NO stairs, NO gravel, NO tight corners, etc.

This is simply pushing pallet jack to move crate a little closer to destination or up driveway into garage.
NO Uncrating. NO Setup.

Once shipment in transit carrier can not change service or refund charge. CALL IF QUESTIONS...

$75 $100