Tooling Package, 9x20 Lathe
- AXA (Series 100) QCTP Set with post mount for 9x20 Lathes
- 3/8" Indexable TCMT Inserts, P1X Cut-Off Blade
- 1/2" Drill Chuck, 2MT Standard to 33JT Drill Chuck Arbor
- 9-piece carbide Boring Bar Set - 1/2" shank
- 5 Center Drills (sizes 1-5)
The AXA (Series 100) quick change tool post set (QCTP) includes the tool post, a turning & facing tool holder, a boring, turning & facing tool holder, a heavy duty boring bar holder, a universal parting blade holder, a knurling, facing & turning tool holder. The quick change tool post is made from hardened steel. No tools are required to change tools. Additional tool holders are available. It may require some work in order to make a T-slot nut, to mount this QCTP on your lathe.
The turning tool holders accept tools with 3/8" to 1/2" shank. The turning and boring tool holder accepts boring bars with up to 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades.
The 1/2" capacity drill chuck is mounted on a standard 2 Morse taper shank. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512").
The set of 3/8" shank indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a fitted case. The carbide inserts are TCMT21.51.
The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.
The P1X parting blade is 5/64" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance.
This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, 4, and 5. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.
Our chart of indexable inserts shows which inserts and which screw to use with each of our indexable tools.
Size P1 blades are 1/16" wide and are the most commonly-used size. P1N blades are 0.040" wide. These thinner blades are good for small work. P1X blades are 5/64" wide. Use these thicker blades for parting off larger diameters where you need additional stiffness.
It is easier to part off large diameters if you cut a groove that is wider than the cut-off blade. First, make a cut about 0.100" deep. Now back out and move over at least 0.010". Cut in again, widening the slot. Continue with this cut until you are 0.100" deeper than the first slot. Repeat this process, moving back and forth, until you are through.
Here are the sizes of center drills.
|Number||Body Dia.||Drill Dia.||Length|
This product works with these LittleMachineShop.com products:
- 3416 Insert, TCMT-21.50 Carbide
- 1670 Insert, TCMT-21.51 Carbide
- 3417 Insert, TCMT-21.52 Carbide
- 1724 Insert, TCMW-21.51 HSS
- 1725 Insert, TCMW-21.52 HSS
- 2696 Screw, Insert Retaining, M2.5x6
This product works with lathes with a 9 to 9.49 inch swing and a 2 Morse taper tailstock taper including:
- BD-920N Jet 9x20 Lathe
- Grizzly G4000 9x19 Bench Lathe
- Harbor Freight 45861 Central Machinery 9x20 Bench Lathe