Bench Lathe Tooling Package, 9x20 HiTorque, Premium

- AXA QCTP Set with post mount for SC4 Lathes
- 3/8" Indexable TCMT Inserts, P1 Cut-Off Blade
- 1/2" Drill Chuck, 2MT Standard to 33JT Drill Chuck Arbor
- 9-piece carbide Boring Bar Set - 1/2" shank
- 5 Center Drills (sizes 1-5)
Weight: 18.9 lb
Purchased individually $310.83
This package contains all the tooling you need to be productive with your lathe on the first day you own it. It works with the LittleMachineShop.com HiTorque 9x20 bench lathes as well as other SC50 lathes.
Includes an AXA (Series 100) quick change tool post set (QCTP).
This set includes the tool post and the following tool holders:
2 - #1 Turning and Facing
1 - #2 Boring, Turning and Facing
1 - #4 Heavy Duty Boring will hold both 5/8 and 3/4 boring bars
1 - #7 Universal Parting Blade (for 1/2 inch cut-off blade - horizontal)
The quick change tool post is made from hardened steel. No tools are required to change tools. Additional tool holders are available.
The turning tool holders accept tools with 3/8" to 1/2" shank. The turning and boring tool holder accepts boring bars with up to 1/2" round shanks. The cut-off tool holder holds 1/2" tall parting blades.
The 1/2" capacity drill chuck is mounted on a standard 2 Morse taper shank. The rated capacity of the drill chuck is 1 mm (0.039") to 13 mm (0.512").
The set of 3/8" shank indexable turning tools includes 5 tools (TAR, TAL, TBR, TBL, TE), inserts, a wrench, and extra screws. It comes in a fitted case. The carbide inserts are TCMT21.51.
The carbide tipped 9-piece boring bar set includes three different length boring bars each for minimum bores of 5/16", 3/8", and 7/16". The bore depth ranges from 3/4" to 2-1/4". The heat treated, alloy steel shanks are held to 0.000 to -0.0005" from the nominal diameter.
The P1 parting blade is 5/64" x 1/2" x 4-1/2" and made from M2 HSS. These T-shape parting blades provide great side clearance.
This package includes 5 different sizes of combined drills and countersinks, commonly called center drills. The center drill set is high speed steel and includes sizes 1, 2, 3, 4, and 5. These are 60 degree center drills. These are the sizes that are most used by bench top machinists.
**NOTE** If your lathe came with a turret tool post and you are intending to upgrade to an AXA tool post you may need to upgrade/modify the compound and tool post stud. Please read all information and check compatibility for this product.

Our chart of indexable inserts shows which inserts and which screw to use with each of our indexable tools.
Size P1 blades are 1/16" wide and are the most commonly-used size. P1N blades are 0.040" wide. These thinner blades are good for small work. P1X blades are 5/64" wide. Use these thicker blades for parting off larger diameters where you need additional stiffness.
It is easier to part off large diameters if you cut a groove that is wider than the cut-off blade. First, make a cut about 0.100" deep. Now back out and move over at least 0.010". Cut in again, widening the slot. Continue with this cut until you are 0.100" deeper than the first slot. Repeat this process, moving back and forth, until you are through.

Here are the sizes of center drills.
Number | Body Dia. | Drill Dia. | Length |
1 | 1/8" | 3/64" | 1 1/4" |
2 | 3/16" | 5/64" | 1 7/8" |
3 | 1/4" | 7/64" | 2" |
4 | 5/16" | 1/8" | 2 1/8" |
5 | 7/16" | 3/16" | 2 3/4" |
Compatibility
This product works with the following lathes. (If your machine is not on this list, we cannot verify compatibility.)
- LittleMachineShop.com 7600 HiTorque 9x20 Bench Lathe
- LittleMachineShop.com 7650 HiTorque 9x20 Bench Lathe