Dasqua Precision Tools
LittleMachineShop.com measurement tools are all best-in-class products. Whether you want an economical starter kit or a top-of-the-line tool, we have you covered. Also, check out our full line of tooling, accessories and replacement parts. As always, we stand behind our products 100% and provide US based tech support for everything we sell.
|
- Ten piece angle block set
- For fast, easy and accurate angle determination
- Can be combined to create other angles beyond the 10 provided
- Hardened steel, abrasion resistent
- Measuring faces precision ground and lapped
|
|
- Set of 18 metal angle gages
- 5 to 90 degrees by 5 degree increments
- Satin chrome finish
- Eight gaging surfaces on each gage
- Check primary angle, 1/2 primary and complementary angles
|
|
- Measure ID of holes from 2" to 6" in diameter
- Close tolerance measurement of ID, taper and roundness
- interchangeable anvils
- Accuracy: 0.0005"
- Includes fitted case
|
|
- Caliper Accessory Kit
- Extends caliper jaws for a variety of uses
- Includes three sets of points, frames, lock screws and Allen wrench
|
|
- Max. measurement 6" (150 mm)
- Flat leg type
- Quick adjustment nut
- Easy adjustment over entire range
- Polished natural steel finish
|
|
- Constructed of solid stainless steel
- Shock-proof gearing
- Hardened stainless steel bar, rack, gears, depth rod and measuring faces
- Knife-edge contacts for both inside and outside measurements
- Fine adjustment roller for one hand use
|
|
- Dasqua 6" metal housing digital caliper
- Large, easy-to-read LCD display can be zeroed at any position
- Hardened stainless steel body for long life, with fine adjustment thumb wheel
- Resolution is 0.0005" (0.01mm) and linear accuracy meets DIN 862 standard
- Accuracy is 0.001" (0.02mm)
|
|
- 6" (150 mm) range
- 0.0005" (0.01 mm) resolution
- 0.001" (0.02 mm) accuracy
- Inch, metric & fractional measurement
- Special glass etching for superior accuracy
|
|
- Vernier Caliper 0-6" ( 0-150mm), Stainless Steel
- Measure inside, outside, step, and depth
- Vernier scales 0.02mm/0.001" graduation
- Etched lines for easy reading
- Complies to DIN862/ISO2012 caliper standards
|
|
- 12" stainless steel blade
- Includes square head, center head, and protractor head
- 4R Graduation – 8ths, 16ths, 32nds, 64ths
- Integrated level and scriber point
- Accuracy is +/- 15'.
|
|
- 0-22" DIAL DEPTH GAGE
- 2-1/2" BASE
- Measures in .001" graduation
- Dial indicator for easy and clear reading
- Large measuring ranges
|
|
- Seven piece digital depth gage with five extension rods
- 3 Reading functions: inch, metric, & fractional
- Resolution: 0.0005", 0.01mm, 1/64 inch
- Accuracy: +/- 0.001" / 0.02mm
- Power saving auto off feature with extra large LCD display
|
|
- 0-1" Dial indicator
- Made in accordance with DIN878.
- Magnetic base with fine adjustment
- On/off switch makes it easy to position
- V-groove base allows you to mount it on cylindrical surfaces
|
|
- large, easy to read numbers and crisp graduations
- 0-0.5" dial indicator with 0.0005" resolution
- Satin chrome plated steel case
- Strictly made in accordance with D1N878.
- Limit indicator clips are included.
|
|
- 1" dial indicator with 0.001" resolution
- Lug Back
- Shank diameter is 8mm.
- Casing diameter is 58mm.
- Strictly made in accordance with DIN878.
|
|
- 0-2" dial indicator with 0.001" resolution
- Jeweled bearings
- 2.25" Diameter face, 0.375" shank, #4-48 tip thread
- Strictly made in accordance with DIN878.
|
|
- Dial test indicator with 0.0005" graduations
- Range is 0 - 0.030" in either direction
- Reading 0-15-0
- Includes 5/32" and 3/8" diameter posts, dovetails on the back and end, and a 0.078" diameter point
- 7 Jewel movement, Comes in a fitted case
|
|
- On/off, inch/mm & ABS/Preset.
- Range .500" (12.7mm)
- Resolution .0005" (.01mm)
- Reverse travel (± control indicates direction)
- True inch/mm conversion
|
|
- 0-12" Digital Height Gage
- Built-in absolute liner encoder
- Large, easy-to-read LCD display
- Rigid, heavy duty beam and base
- Made of stainless steel
|
|
- Magnetic base indicator holder
- 110 lbs pull with 220mm (8.66") arm length
- Tight locking force
- Dovetail groove for test indicators
- Three clamping holes, 6mm, 8mm and 3/8"
|
|
- Magnetic base indicator holder with fine adjustment
- Permanent magnet has an 60 kg (132 lb) holding force
- On/off switch makes it easy to position
- V-groove base allows you to mount it on cylindrical surfaces
- Works with most AGD dial and test indicators
|
|
- 6" Master Precision Level
- Cast iron with precision ground measuring surface
- Bubble has 0.005" graduation
- Overall accuracy is 0.0005" per 10"
- V-grooved base for round stock
|
|
- 8" Master Precision Level
- Cast iron with precision ground measuring surface
- Bubble has 0.005" graduation
- Overall accuracy is 0.0005" per 10"
- V-grooved base for round stock
|
|
- Four piece measuring tool set
- Includes: Big screen digital caliper, outside micrometer,
- 90 degree beveled edge square, and a 6" steel rule
- Conveniently stored in a sturdy case
|
|
- Measuring range 0 to 3"/Graduation: 0.0001"
- Accuracy: +/- 0.0001" per inch
- Carbide measuring surfaces
- Spindle thread is hardened, ground and lapped
- Strictly made in accordance with DIN 863.
|
|
- Graduation: 0.0001"
- Accuracy is 0.004".
- Ratchet stop
- Spindle lock
- Carbide faces
|
|
- 15 Piece Inch Set-Up Block Set
- Easy-to-read, laser-etched markings
- Block thickness accuracy is 0.001"
- Range is 1/16-1"
|
|
- 4 small hole gages with 0.125" to 0.500" range
- Full spherical ball for very accurate measurements
- Hardened, satin-chrome plated measuring faces
|
|
- Replacement stylus for dial test indicators
- Overall length 16.5mm
- Thread 1.5mm
- Comes with protective cover on tip
|
|
- For measuring holes, slots and recesses
- Measures holes from 5/16" to 6" diameter
- Double action is self-centering
- Satin chrome finish
- Contact ends are hardened and ground
|
|
- Dial indicator thickness gage
- Range: 0-10 mm (0-0.39")
- Graduation: 0.01 mm (0.0004")
- Ceramic measuring faces
- Light weight frame with spindle lifting lever
|
|
- Five pairs thin parallels
- Length: 150mm (6"), Widths 2.5mm (0.1")
- Heights range from 25mm - 47mm (1" - 1.85")
- Height tolerance +/- 0.005mm
- Width tolerance +/-0.01mm
|
|
- Set of ten pairs of thin parallels in a aluminum case
- Parallels are 1/8" thick and 6" long
- Heights are 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-5/8"
- Made of premium alloy steel, hardened, stress-relieved, precision ground, in pairs
- Highly perpendicular, parallel, and dimensionally accurate
|
|
- More robust than plastic checkers
- Each size has a nut and bolt checker on the same gauge with the sizes etched on each gage
- The individual gauges rotate freely on the wire cable for fast thread verification
- All on a convenient wire cable with a loop for hanging
|
|
Boring Head Set, 2MT Professional Grade
Boring Bar Set, 3/8" Shank, Carbide
