LittleMachineShop.com has all the accessories for your mini lathe. We carry steady rests, faceplates, live centers, dead centers, lathe chucks, boring bars, indexable turning tools, collet sets, cut-off tool holders, and knurlers.
|
These parts change Grizzly, Harbor Freight, Homier, and Cummins mini lathes to 20 thread per inch feed screws on the cross slide and compound rest.
Each rotation of the hand wheel will advance 0.050".
|
|
- Complete set of mini lathe accessories
- Fully equip your mini lathe
- Steadies, centers, chucks, locks and dogs
|
|
- Complete set of mini lathe accessories
- Fully equip your mini lathe
- Steadies, centers, chucks, locks and dogs
|
|
- Replaces both DRO units with 0.001" graduated dials
- Use this kit to convert a lathe with the newer DROs (black)
|
|
|
- Replaces both DRO units with 0.001" graduated dials
- Use this kit to convert a lathe with the older DROs (gray)
|
|
- ONLY FITS LittleMachineShop.com HiTorque 7x12 Mini Lathes
- Extend your HiTorque Mini Lathe to 16" between centers
- Precision ground ways are approximately 27-7/8" long
- Rack is approximately 18" long
- Lead screw is approximately 29" long
|
|
- Precision ways are approximately 28-3/8" long
- Rack is approximately 17-3/4" long
- Lead screw is approximately 29-5/16" long
- PLEASE CHECK COMPATABILITY BEFORE ORDERING
|
|
- Locks carriage down to ways
- Will NOT rock the carriage when locking
- Mounts to existing follower rest mounting holes
- No tools required to lock the carriage
|
|
- Mini lathe carriage stop
- Easy to attach and adjust
- Includes fine adjustment
- Useful for multiple cutting passes
- Helps when making multiple parts
|
|
- 80/15 and 90 teeth
- Module 1 Metric gears
- Bore 12 mm
- Keyway 3 mm
- Width 8 mm
|
|
- Module 1 Metric gears
- Bore 12 mm
- Keyway 3 mm
- Width 7.5 mm
- Fit SIEG C2, SC2 and C3 classes of mini lathes
|
|
- Attractive all metal change gears
- Module 1 Metric gears
- Bore 12 mm
- Keyway 3 mm
- Width 8 mm
|
|
- 21 Teeth
- Bore 12 mm
- Keyway 3 mm
- Width 8 mm
|
|
- Faceplate clamping kit
- Fits faceplates for SIEG C4, SC4 and HiTorque bench lathes
- M12 fasteners
|
|
- Faceplate clamping kit
- Fits faceplates for mini lathes and some micro lathes
- M8 fasteners
|
|
- Pre-drilled compound rest bottom, mini lathe
- Extra holes to eliminate chatter
- For lathes with a 1 mm thread pitch, 0.0394" per revolution
- Use with dial having 40 divisions
- Fits numerous SIEG C2 and C3 and HiTorque mini lathes
|
|
- Pre-drilled & milled compound rest bottom, mini lathe
- Extra holes to eliminate chatter
- 1/4" thinner that standard part allows AXA tool posts
- For lathes with a 1 mm thread pitch, 0.0394" per revolution
- Fits numerous SIEG C2 and C3 and HiTorque mini lathes
|
|
- Pre-drilled compound rest bottom, mini lathe, 20 TPI
- For 20 TPI lathes that advance 0.050" per revolution per revolution
- Extra holes to eliminate chatter
- 1/4" thinner that standard part allows AXA tool posts
- Fits Micro-Mark and HiTorque 4200 mini lathes
|
|
- Pre-drilled compound rest bottom, mini lathe, 20 TPI
- For 20 TPI lathes that advance 0.050" per revolution per revolution
- Extra holes to eliminate chatter
- Fits Micro-Mark mini lathes
- Fits HiTorque 4200 mini lathe
|
|
- Two 8 mm T-slots 25 mm center to center
- Mounts QCTP or standard 4-way tool holder
|
|
- Mini lathe drawbar
- 3MT x 3/8"-16 x 6.5"
- Hardened
- Fits HiTorque mini lathes with 3MT spindle
- Fit SIEG SC2 and C3 mini lathes
|
|
- Mini lathe drawbar
- 3MT x 3/8"-16 x 6.5"
- Hardened
- Fits HiTorque mini lathes with 3MT spindle
- Fit SIEG SC2 and C3 mini lathes
|
|
- 3/8-16x5, Hex Head Cap Screw
- Mini lathe drawbar
- Hardened grade 8
- Fit SIEG C2 and SC2 class of mini lathes
|
|
- Mini lathe drawbar
- 3MT x 3/8"-16 x 5"
- Hardened grade 8
- Fit SIEG C2 and SC2 class of mini lathes
- Includes washer
|
|
- Mini lathe drawbar
- 3MT x M12 - 120 mm (4.72")
- Hardened
- Fit SIEG C2 and SC2 class of mini lathes
|
|
- Extends cross slide travel on 7x10 and 7x12 lathe by 1 inch
- Made for SIEG models C2 and C3 lathes
- If your lathe is not listed in compatibility, call our tech dept.
|
|
- Specific Screw for Micro-Mark brand lathes
- Also works on any SIEG mini lathe that has been converted to 20 TPI screws
|
|
- Specific Screw for our newer style 5200 HiTorque lathes
- Also works on any SIEG mini lathe that has the 5567 DRO kit installed
- ONLY ORDER THIS VERSION IF YOU HAVE THE NEWER, BLACK DRO READOUTS
|
|
- 160 mm Diameter
- 8 Slots to Mount Work
- 72 mm Registration Recess
- Requires 3 M8 x 25 Studs
- Compatible with Lathes with 100 mm Flange Chuck Mount
|
|
- 160 mm diameter
- 8 slots to mount work
- 55 mm registration recess
- Requires 3 M6 x 30 studs
- Compatible with lathes with 80 mm flange chuck mount
|
|
Ball bearing finger assembly for the mini lathe steady rest and follower rest.
Get three of these to convert a LittleMachineShop.com 1197 steady rest to a ball bearing steady rest.
Get two of these to convert a LittleMachineShop.com 1198 follower rest to a ball bearing follower rest.
|
|
- Ball bearing conversion kit for brass fingers
- For steady rests and follower rests
- Includes bearings, screws and locking washers
|
|
This follower rest mounts on the lathe saddle and moves with the carriage.
The follower rest can support work up to 1" in diameter
|
|
Follower rest for the mini lathe.
This follower rest has been modified with the addition of ball bearings so it will reduce marking of the workpiece.
|
|
- Brass gib for cross slide
- Brass gib for compound rest
|
|
- Anodized handwheels for apron and tailstock
- Chrome levers for half-nuts, tool post and tailstock
- Handwheels: 90 mm OD, 8 mm bore
- Levers: M8 threading
- Acron Nuts: M8 threading
|
|
- Fits 7x10, 7x12, 7x14 and 7x16 lathes
|
|
- Changes every plastic gear on the mini lathe to metal
- Metal change gear set
- Metal 2-speed transmission gears
- Metal lead screw drive gears
- Metal 80-tooth gears
|
|
- Replaces both plastic transmission gears with metal
- Fits mini lathes and 3MT mini mills
- Small Gear: 12 Teeth / 20 Teeth, 12 mm Bore, 4 mm Keyway
- Large Gear: 21 Teeth / 29 Teeth, 30 mm Bore, 5 mm Keyway
|
|
- Metric threading kit for 7x10 mini lathes
- Fits HiTorque, SIEG, and other 7x10 mini lathes
|
|
|
- Metric threading kit for 7x12 mini lathes
- Fits HiTorque, SIEG, and other 7x12 mini lathes
|
|
|
- Metric threading kit for 7x14 mini lathes
- Fits HiTorque, SIEG, and other 7x14 mini lathes
|
|
|
- Metric threading kit for 7x16 mini lathes
- Fits HiTorque, SIEG, and other 7x16 mini lathes
|
|
- Milling attachment that bolts on to the mini lathe
- Set of 6 two-flute end mills, 1/8" to 1/2" diameter
- 3/8" End mill holder and drawbar
|
|
- Cast iron and steel with moulded handwheel
- Replaces the compound rest
- Travel is 3.6"
- Dial graduations in 0.025 mm, 60 divisions
|
|
- Digital Readouts for cross slide and compound rest
- Metal hand wheels and chrome levers
- All metal change gears
|
|
- Quick change tool post plinth block
- Adds rigidity to the tool post mounting
- Designed by, and custom made for LittleMachineShop.com
- Fits mini lathes with QCTP - replaces compound rest
- Designed for HiTorque and SIEG C2/SC2 and C3 mini lathes
|
|
- Heavy duty switch
- Five times the rated life of the standard switch
- Switch rated at 16 A at 120/250 VAC
- No soldering required to install
|
|
This kit contains the parts that fail most often on the 7x14 mini lathe.
The kit contains:
5 GMA-5 fuses
1 Gear, 2-Speed Intermediate Shaft
1 Belt, Timing
1 Pulley, Timing Belt Motor (9 mm shaft)
1 Pulley, Timing Belt Intermediate Shaft
1 Gear, 80 Tooth
|
|
This spare parts package contains the parts that fail most often on the mini lathe.
This mini lathe spare parts kit contains:
5 GMA-5 fuses
1 Gear, 2-Speed Intermediate Shaft
1 Gear, 2-Speed Spindle
1 Belt, Timing
1 Pulley, Timing Belt Motor (8 mm shaft)
1 Pulley, Timing Belt Intermediate Shaft
1 Gear, 80 Tooth
|
|
- Spider for back of mini lathe spindle
- Use to support long stock through spindle
- Replaces 2nd spindle nut (M27x1.5 thread)
- 3/4" (20 mm) diameter capacity
- Uses M6x20 cap screws
|
|
Great for threading, this allows you to turn your spindle by hand as slowly as you like.
Tighten the bolt to engage the crank. Loosen to remove it.
|
|
- 0 - 1" Steady rest
- 1 - 2" Ball bearing steady rest
- Fingers are interchangeable
- Includes mounting clamps for mounting to the lathe bed
|
|
This lathe steady rest can support work up to 1" in diameter.
If this product is out of stock, you may want to try our part number 2418 Steady Rest, Ball Bearing as a substitute! It is the same Steady Rest just with the added ball bearing feature.
This steady rest comes with the fasteners to lock it to the lathe bed.
|
|
The mini lathe steady rest can support work up to 1" in diameter.
This steady rest has been modified with the addition of ball bearings so it will reduce marking of the workpiece.
Inlcudes clamping foot, washer, and nut for mounting.
|
|
The steady rest can support work from 1" to 2.15" (25 - 55 mm) diameter.
Includes mounting clamp bolt and nut for installation on the lathe.
|
|
The steady rest can support work from 1" to 2.15" (25 - 55 mm) diameter.
This steady rest has been modified with the addition of ball bearings so it will reduce marking of the workpiece.
Inlcudes clamping foot, washer, and nut for mounting.
|
|
- Heavy duty switch with silver alloy contacts
- Five times the rated life of the standard switch
- Switch rated at 16 A at 120/250 VAC
- No soldering required to install
|
|
This kit converts a standard mini lathe tailstock to lock by lever action. This camlock action locks the tailstock to the ways by moving a lever about 45 degrees.
You must drill one 1/2" hole in the back of the tailstock casting.
This lathe cam lock kit is made from heat treated 4140 steel for long life.
|
|
This bracket supports the right end of the telescoping lead screw cover.
|
|
- Hold brackets in place to locate holes
- Makes installation simple
|
|
- All metal construction
- Works with threading dial
|
|
- All metal construction
- Works with threading dial
|
|
- Replaces a DRO unit for threading
- Changeover takes about two minutes
- ONLY ORDER THIS VERSION IF YOU HAVE THE NEWER, BLACK DRO READOUTS
|
|
|
- Replaces a DRO unit for threading
- Changeover takes about two minutes
- ONLY ORDER THIS VERSION IF YOU HAVE THE OLDER, GRAY DRO READOUTS
|
|
- Threaded thumb screw for HiTorque and SIEG mini lathes
- Designed to replace cap screws on change gear cover
- Knurled end allows for quick access to gears without tools
- Save time and effort in executing your lathe operations
- This item is made specifically for LittleMachineShop.com
|
|
- Includes 8 M6x25 socket head cap screws
|
|
This mill tooling plate works with the lathe milling attachment. It is 120 mm (4.72") square and includes four clamps. The holes are threaded M6 and are 20 mm on centers
|
|
- Several small items to make your HiTorque lathe work better and last longer
- Easier gib and saddle retainer adjustment
- Quicker gear cover removal
|
|
- Several small items to make your lathe work better and last longer
- Easier gib and saddle retainer adjustment
- Fewer busted knuckles
- Quicker gear cover removal
- Fewer tailstock clamp jams
|
|
- Turn wood on a metal lathe
- Includes woodturning tool rest and spur center
- Fits several SIEG mini lathes classes from C2 to SC4
- Fit LittleMachineShop.com HiTorque mini lathes and bench lathes
|
DRO Scale, 12" (300 mm) with Display
Tool Bit, 5/16" x 2-1/2", M2 HSS
